- Bells/Noise Makers (12)
- Mirrors (2)
- Show More Brands
- Show Fewer Brands
Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.
The original model of our mountain bike bell, Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. It includes two separate o-rings to fit all handlebar sizes and is easy to move between bikes. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life. - We've also upgraded the backing pad to a much grippier rubber that prevents the bell from movement while shifting between ring modes. The new pad is much more durable than the old pad and won't wear out.
Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters
The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware
• Adjustable quick-release strap • Ideal for MTB handlebars • Fits 20-32mm handlebars
Ride smart and more safely with Serfas Bar End Mirrors to help increase awareness and visibility of your surroundings as you ride. - Unbreakable Stainless Steel Lens - Base: Eco-Friendly High Impact Nylon Fiber - Universal Design For Left & Right - Fits Handlebars With 16mm-22mm Diameter Bar Ends - Lens: 62mm Diameter
Ring-a-ding-a-ding! Get noticed and keep slowpokes out of your way with Serfas' line of minimalist-style, simple-to-use handlebar mounted bicycle bells. The perfect socially acceptable alternative to shouting crowd favorites such as "watch out!" and "move it or lose it!". - Aluminum Construction - Single Strike Mechanism - Secure Screw Type Bracket w/ Rubber Insert - Anodized Black Finish - 360-Degree Adjustable Rotating Striker Position - Fits 22.2 - 25.4mm Diameter Handlebar
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters
- Alloy lever action safety bells perfect for kids bikes - Sturdy alloy construction with an adorable insect or animal on top
The perfect way to say 'Hello.' Or 'hey there,' 'coming through,' and 'sup.' We've made ringing an art form. Choose from our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: Universal - Material: 7075 Aluminum Alloy
Increase awareness and visibility of your surroundings as you ride. Features: - Blast-Resistant Glass Reflective Lens - 360 Degree Adjustable Viewing Angle - Mounts 21-26mm Diameter Bars (5mm Hex Wrench Required For Install) - Eco-Friendly High Impact Nylon Fiber Body Specs: - Mounts 21mm-26mm Diameter Handlebars - Lens: Blast-Resistant Glass - Color: Black - Weight: 119 Grams (Per Side) / 238 Grams (Combined Left and Right) - Quantity: 1 (Left/Right Sides Sold Individually) - Installation Notes: 5mm Hex Wrench Required
•Classic Straight design •Clamp fits most handlebars •10" length
The perfect way to say 'Hello.' Or 'hey there,' 'coming through' and 'sup.' We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Cheerful 'ding-dong' doorbell-style ring - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: 22.2mm - Material: Steel - Weight: 130g
Page 1 of 1